Drywall Repair & Texture Matching in Las Vegas
Holes, cracks and old water damage repaired and textured to match the surrounding wall — so the fix disappears instead of leaving a visible square.
NV State Licensed · Fully Insured · CMRC Certified — Mold Remediation
Holes and cracks are the first thing a tenant or buyer notices, and a bad patch is almost worse than the damage. The job isn't filling the gap — it's matching texture, sheen and color so the repair reads as part of the original wall.
Water-damaged drywall gets traced back to its source before it's replaced. Patching over an active leak just means doing the same repair again in six months, so we find the cause first and tell you what we found.
What's included
- Holes, cracks and stress fractures repaired
- Water-damaged sections replaced
- Corner bead and popped screw repair
- Texture matched to the existing wall
- Primed and blended to the wall color
- Wall and ceiling repairs in one visit
Specifications
- Repair scope
- Small holes through full sheet replacement, settling cracks, stress fractures at corners, water-damaged sections, damaged corner bead and popped nails or screws.
- Materials
- 1/2-inch and 5/8-inch drywall, moisture-resistant board in bathrooms and kitchens, paper tape and setting-type compound for structural patches.
- Texture matching
- Orange peel, light and heavy knockdown, hand textures and smooth finishes matched to the surrounding wall from a test panel before the full repair is coated.
- Finishing standard
- Three-coat patch sanded to a level-4 finish before texture, so the repair doesn't telegraph through the paint.
- Paint blending
- Patched areas primed and blended to the existing wall color and sheen — and where a faded wall makes an invisible match impossible, we say so before we start.
Small patches are same-day. Larger or multi-room repairs run 2–3 days to allow proper drying between coats.
Before and after: drywall repair
A damaged section replaced, textured and painted back into the wall until it disappears.


Drag the divider to compare the damaged wall with the finished repair.
How we repair drywall
Find the cause, replace what's damaged, match the texture, blend the paint.
- 1
Diagnose the damage
We check whether the damage is impact, settling or water — and if it's water, we trace it back to the source before anything is patched.
- 2
Replace and tape
Damaged board is cut back to sound material, new board is fitted and fastened, and joints are taped with setting-type compound.
- 3
Match the texture
The patch is sanded to a level-4 finish, then texture is matched to the surrounding wall from a test panel.
- 4
Prime and blend
The repair is primed and blended into the existing wall color and sheen, and we walk it with you in raking light.
Drywall repair questions
What we're asked most about holes, cracks, water damage and texture matching.
Related services
These are the services most often paired with drywall repair on the same property.
Got a wall that needs fixing?
Send a photo of the damage with the property address and we'll tell you what the repair involves and what it costs — free, usually within 24 to 48 hours.
NV State Licensed · Fully Insured · CMRC Certified Mold Remediation


